>> 860 MHz or 1 GHz 2-PORT OPTICAL NODE | 860 MHz 4-PORT OPTICAL NODE

Fiber Optic Products - Network

Outdoor Plant Optical Nodes
1 GHz 4-Port Optical Node | ON-1000-4 Series

Click on any of the images above to view larger.
 
PRIVACY POLICY | TERMS OF USE | SITE MAP
919 E. 29th St. Lawrence, KS 66046 | Tel: 1-800-255-0247 | Fax: 1-785-841-9512 | Hours: 8:30 a.m. to 4:00 p.m. CT (M-F)


• 4 High Level Output Ports with GaAs Power Double Amplifier Modules
• 25 A Current Capacity (Steady State) and 25 A Surge Survivability
• Surge Resistant Circuitry Ensures Gain Stage Protection without Fuses and Protection from other Failure Causing Devices
• Two 40-90 VAC High Efficacy Switch Mode Power Supplies
• Standard Fiber Management Tray Provides Fiber and Connector Storage for up to 6 Connector Pairs
• Select 1, 2, or 4 Return(Upstream) Path CWDM Optical Transmitters. Standard Model has 1 Receiver and 1 Return(Upstream) Transmitter
• Local Test Points and LED Indicators on Optical Receivers and Transmitters that Simplify Installation and Maintenance
• Optical Status Monitoring and Control
• Optical Node Uses Fixed Value Plug-in Attenuator and Equalizer Accessories
• Forward(Downstream) Output Test Point and Return(Upstream) Input Test Point for each Port allows for Optimum Design and Alignment.
 

*Product specifications are subject to change without notice.



For more information on a product, download the specifications sheets here.
   
Specification Sheet | 1 GHz 4 Port Optical Node
   
   
   
   
   
   
   
   

ON-ATT-xx (Attenuator Plug In for 4 Port Optical Node)
  • Used to Adjust the Amplifier Levels on the 4 Port Optical Node
  • Available in a 2, 4, 6, 8, 10, 12, 14, 16, 18, 20 or 22 dB Option
• ON-EQ-xx (Equalizer Plug in for For 4 Port Optical Node)
  • Used to Increase the Output Tilt of the Receiver and on the 4 Optical Nodes
  • Available in a 2, 4, 6, 8, 10, 12, 14, 16, 18, 20 or 22 dB option
• ON-T-x (Transmitter Accessory for 4 Port Optical Node)
  • Converts Broadband RF Signals to Optical Signals
• ON-R (Receiver Accessory for 4 Port Optical Node)
  • Converts the Received Optical Signal to Broadband RF

 

 

 

 

 

 

Back to Fiber Home Page